Rotten weatherboards: what to look for before repainting

Two weatherboard jobs, the signs we found and the work that came before paint.

If you are looking at weatherboard repairs for your Melbourne home, start with the boards as well as the paint. On one of our recorded jobs, flaking paint came with split and cupped boards and gaps between the laps. The timber needed replacing.

Here is what that job and a second repair in Richmond involved, and what to include when you ask us about a wall at your own place.

Look for more than flaking paint

On our weatherboard replacement job, the old boards had reached the end of their life. Our notes record these signs together:

  • Flaking paint.
  • Split and cupped boards.
  • Gaps opening up between the laps.

At that stage, painting over the boards would not fix them. Our job notes also describe how failing boards let moisture into the wall frame behind. The work needed to start with the timber.

Use those signs as a checklist for the photos and notes you send through. If you can see splits, cupping or open gaps as well as peeling paint, include them in the repair brief.

Weatherboards replaced: before
Before
Weatherboards replaced: after
After

See the job notes and both photos

What happened before the new boards were primed

We stripped the failing boards off the wall and checked the frame behind. Then we fitted new weatherboards course by course, keeping the laps consistent and the lines straight along the wall.

The joints were staggered, the boards fixed off and the nail holes filled. The new boards were then primed ready for paint.

That last detail matters when you compare the photos: this job was recorded as primed and ready for paint. The finished paintwork is a separate part of the brief to discuss.

A second job: replacement and painting in Richmond

Our Richmond weatherboard job included the paint finish. We removed the rotting boards, replaced them with fresh timber, applied an undercoat and two coats of paint, and filled the ends.

Both jobs involved replacing failing timber. Their recorded finishes differed: one wall was primed ready for paint, while the Richmond boards were undercoated and painted.

Rotten weatherboards replaced and painted: before
Before
Rotten weatherboards replaced and painted: after
After

See all four Richmond photos

What to send with a weatherboard repair enquiry

Send photos and a short description of what needs doing. Note the signs you can see, and say whether you are asking about board replacement, painting or both.

Our handyman service covers repairs, and our painting page sets out the painting work we do. The two jobs above give you examples to refer to when describing your wall.

Send your photos and repair details.

Share this post

All posts

Ready to get it sorted?

Seen your own place in “Rotten weatherboards: what to look for before repainting”? Send a photo and a line about what needs doing.

Request a Free Quote
Get a Free Quote Call 0426 576 007